- Quick and easy air fork pressure adjustment
- Reliable design for confidence
- Compatible with standard or oversize bars
- Works with OE and aftermarket bar mounts/positions
- Simple no modifications install in minutes
- O-ring equipped, laser engraved and CNC machined air caps
- No adapters or special hoses required
- Made in the USA
- Quick and easy air fork pressure adjustment
- Reliable design for confidence
- Compatible with standard or oversize bars
- Works with OE and aftermarket bar mounts/positions
- Simple no modifications install in minutes
- O-ring equipped, laser engraved and CNC machined air caps
- No adapters or special hoses required
- Made in the USA
- Quick and easy air fork pressure adjustment
- Reliable design for confidence
- Compatible with standard or oversize bars
- Works with OE and aftermarket bar mounts/positions
- Simple no modifications install in minutes
- O-ring equipped, laser engraved and CNC machined air caps
- No adapters or special hoses required
- Made in the USA
- Quick and easy air fork pressure adjustment
- Reliable design for confidence
- Compatible with standard or oversize bars
- Works with OE and aftermarket bar mounts/positions
- Simple no modifications install in minutes
- O-ring equipped, laser engraved and CNC machined air caps
- No adapters or special hoses required
- Made in the USA
- Quick and easy air fork pressure adjustment
- Reliable design for confidence
- Compatible with standard or oversize bars
- Works with OE and aftermarket bar mounts/positions
- Simple no modifications install in minutes
- O-ring equipped, laser engraved and CNC machined air cap included
- No adapters or special hoses required
- Made in the USA
- Quick and easy air fork pressure adjustment
- Reliable design for confidence
- Compatible with standard or oversize bars
- Works with OE and aftermarket bar mounts/positions
- Simple no modifications install in minutes
- O-ring equipped, laser engraved and CNC machined air cap included
- No adapters or special hoses required
- Made in the USA
Air Fork EZ Fill FAQ’s
Q: What are the advantages of the 'Air Fork EZ Fill' over the stock setup of Air Forks?
A: Even though Honda / Husqvarna / KTM and Suzuki have a Schrader valve on the top of the fork, it is not easy to get a pump attached without removing the front number plate. If you have, or add, oversize bars or aftermarket bar mounts, the problem gets worse. Or if you own a Kawasaki and have dealt with the time-consuming task of removing the stock plugs, screwing in the adapters (which don't work with oversized bars) you have experienced the 'reason' we made these kits.
Q: How hard are they to install?
A: Installation is very simple. The Kawasaki bolts on in 2-3 minutes. The Honda / Husqvarna / KTM and Suzuki take about 5 minutes because you have to bleed the air out to install, and then re-fill the forks with air.
Q: Will they work on the Kawasaki if I move the stock handlebar clamps to the forward position?
A: Yes! You will need to rotate the forks 180 degrees in the triple clamps, so the EZ Fill kits will be at the 'back' of the forks.
Q: Do the kits work with all oversized bars and various bar mounts?
A: Yes, ALL configuration of bars, mounts and positions.
Q: Do I have to loosen the bolt to be able to 'swivel' the fill valve?
A: No! They were designed to swivel without having to loosen the 'bolt'.
Q: Can I remove the forks from the bike without having to remove the Air Fork EZ Fills?
A: Yes, we re-designed our kits to allow for removal of forks without having to un-install the EZ Fills. (You will however have to remove the Black Air Caps which will gain enough clearance for fork removal)
Q: Why are the EZ Fill kits Brass and not Aluminum?
A: We initially made our test kits out of Aluminum since it is lighter than Brass, and lets face it, we're (the) Aluminum guys...But, we soon discovered that even using hard anodized coatings, the Aluminum fittings showed signs of wear in the 'pivot' area. We also realized that Brass is a better material to use where the pump interfaces (threads) on to the adapters. We considered using a brass adapter into the Aluminum, but after seeing the wear in the pivot area, Brass was clearly the best and safest option.
Q: Do you sell replacement parts for the EZ Fill kits?
A: Yes, absolutely. We offer replacement components for the EZ Fill kits, as well as replacement parts for any other Works Connection product you may have.
Q: Do you sell the Black Air Caps separately?
A: Yes, we do we sell them in a 2-pack and a 10-pack since they fit any and all Schrader valves.
Q: Why didn't you make a (2 into 1) kit for easier pressure adjustments?
A: We liked the idea of (2 into 1) initially, but realized quickly that if one side loses pressure for any reason (fork damage, leaky seal, air tubing failure, crash induced damage etc) that the front end of the bike would completely collapse, which would be a very dangerous situation.
Q: Couldn't you make a (2 into 1) kit that had some type of a backflow preventer or check valve that could still keep each side separate?
A: We could have designed a system that would work, but the cost and complexity of the system would be ridiculously expensive to produce and still prone to crash damage.
Q: Are the Air Fork EZ Fill kits made in the USA?
A: Yes, American made!
Air Fork EZ Fill FAQ’s
Q: What are the advantages of the 'Air Fork EZ Fill' over the stock setup of Air Forks?
A: Even though Honda / Husqvarna / KTM and Suzuki have a Schrader valve on the top of the fork, it is not easy to get a pump attached without removing the front number plate. If you have, or add, oversize bars or aftermarket bar mounts, the problem gets worse. Or if you own a Kawasaki and have dealt with the time-consuming task of removing the stock plugs, screwing in the adapters (which don't work with oversized bars) you have experienced the 'reason' we made these kits.
Q: How hard are they to install?
A: Installation is very simple. The Kawasaki bolts on in 2-3 minutes. The Honda / Husqvarna / KTM and Suzuki take about 5 minutes because you have to bleed the air out to install, and then re-fill the forks with air.
Q: Will they work on the Kawasaki if I move the stock handlebar clamps to the forward position?
A: Yes! You will need to rotate the forks 180 degrees in the triple clamps, so the EZ Fill kits will be at the 'back' of the forks.
Q: Do the kits work with all oversized bars and various bar mounts?
A: Yes, ALL configuration of bars, mounts and positions.
Q: Do I have to loosen the bolt to be able to 'swivel' the fill valve?
A: No! They were designed to swivel without having to loosen the 'bolt'.
Q: Can I remove the forks from the bike without having to remove the Air Fork EZ Fills?
A: Yes, we re-designed our kits to allow for removal of forks without having to un-install the EZ Fills. (You will however have to remove the Black Air Caps which will gain enough clearance for fork removal)
Q: Why are the EZ Fill kits Brass and not Aluminum?
A: We initially made our test kits out of Aluminum since it is lighter than Brass, and lets face it, we're (the) Aluminum guys...But, we soon discovered that even using hard anodized coatings, the Aluminum fittings showed signs of wear in the 'pivot' area. We also realized that Brass is a better material to use where the pump interfaces (threads) on to the adapters. We considered using a brass adapter into the Aluminum, but after seeing the wear in the pivot area, Brass was clearly the best and safest option.
Q: Do you sell replacement parts for the EZ Fill kits?
A: Yes, absolutely. We offer replacement components for the EZ Fill kits, as well as replacement parts for any other Works Connection product you may have.
Q: Do you sell the Black Air Caps separately?
A: Yes, we do we sell them in a 2-pack and a 10-pack since they fit any and all Schrader valves.
Q: Why didn't you make a (2 into 1) kit for easier pressure adjustments?
A: We liked the idea of (2 into 1) initially, but realized quickly that if one side loses pressure for any reason (fork damage, leaky seal, air tubing failure, crash induced damage etc) that the front end of the bike would completely collapse, which would be a very dangerous situation.
Q: Couldn't you make a (2 into 1) kit that had some type of a backflow preventer or check valve that could still keep each side separate?
A: We could have designed a system that would work, but the cost and complexity of the system would be ridiculously expensive to produce and still prone to crash damage.
Q: Are the Air Fork EZ Fill kits made in the USA?
A: Yes, American made!
Air Fork EZ Fill FAQ’s
Q: What are the advantages of the 'Air Fork EZ Fill' over the stock setup of Air Forks?
A: Even though Honda / Husqvarna / KTM and Suzuki have a Schrader valve on the top of the fork, it is not easy to get a pump attached without removing the front number plate. If you have, or add, oversize bars or aftermarket bar mounts, the problem gets worse. Or if you own a Kawasaki and have dealt with the time-consuming task of removing the stock plugs, screwing in the adapters (which don't work with oversized bars) you have experienced the 'reason' we made these kits.
Q: How hard are they to install?
A: Installation is very simple. The Kawasaki bolts on in 2-3 minutes. The Honda / Husqvarna / KTM and Suzuki take about 5 minutes because you have to bleed the air out to install, and then re-fill the forks with air.
Q: Will they work on the Kawasaki if I move the stock handlebar clamps to the forward position?
A: Yes! You will need to rotate the forks 180 degrees in the triple clamps, so the EZ Fill kits will be at the 'back' of the forks.
Q: Do the kits work with all oversized bars and various bar mounts?
A: Yes, ALL configuration of bars, mounts and positions.
Q: Do I have to loosen the bolt to be able to 'swivel' the fill valve?
A: No! They were designed to swivel without having to loosen the 'bolt'.
Q: Can I remove the forks from the bike without having to remove the Air Fork EZ Fills?
A: Yes, we re-designed our kits to allow for removal of forks without having to un-install the EZ Fills. (You will however have to remove the Black Air Caps which will gain enough clearance for fork removal)
Q: Why are the EZ Fill kits Brass and not Aluminum?
A: We initially made our test kits out of Aluminum since it is lighter than Brass, and lets face it, we're (the) Aluminum guys...But, we soon discovered that even using hard anodized coatings, the Aluminum fittings showed signs of wear in the 'pivot' area. We also realized that Brass is a better material to use where the pump interfaces (threads) on to the adapters. We considered using a brass adapter into the Aluminum, but after seeing the wear in the pivot area, Brass was clearly the best and safest option.
Q: Do you sell replacement parts for the EZ Fill kits?
A: Yes, absolutely. We offer replacement components for the EZ Fill kits, as well as replacement parts for any other Works Connection product you may have.
Q: Do you sell the Black Air Caps separately?
A: Yes, we do we sell them in a 2-pack and a 10-pack since they fit any and all Schrader valves.
Q: Why didn't you make a (2 into 1) kit for easier pressure adjustments?
A: We liked the idea of (2 into 1) initially, but realized quickly that if one side loses pressure for any reason (fork damage, leaky seal, air tubing failure, crash induced damage etc) that the front end of the bike would completely collapse, which would be a very dangerous situation.
Q: Couldn't you make a (2 into 1) kit that had some type of a backflow preventer or check valve that could still keep each side separate?
A: We could have designed a system that would work, but the cost and complexity of the system would be ridiculously expensive to produce and still prone to crash damage.
Q: Are the Air Fork EZ Fill kits made in the USA?
A: Yes, American made!
Air Fork EZ Fill FAQ’s
Q: What are the advantages of the 'Air Fork EZ Fill' over the stock setup of Air Forks?
A: Even though Honda / Husqvarna / KTM and Suzuki have a Schrader valve on the top of the fork, it is not easy to get a pump attached without removing the front number plate. If you have, or add, oversize bars or aftermarket bar mounts, the problem gets worse. Or if you own a Kawasaki and have dealt with the time-consuming task of removing the stock plugs, screwing in the adapters (which don't work with oversized bars) you have experienced the 'reason' we made these kits.
Q: How hard are they to install?
A: Installation is very simple. The Kawasaki bolts on in 2-3 minutes. The Honda / Husqvarna / KTM and Suzuki take about 5 minutes because you have to bleed the air out to install, and then re-fill the forks with air.
Q: Will they work on the Kawasaki if I move the stock handlebar clamps to the forward position?
A: Yes! You will need to rotate the forks 180 degrees in the triple clamps, so the EZ Fill kits will be at the 'back' of the forks.
Q: Do the kits work with all oversized bars and various bar mounts?
A: Yes, ALL configuration of bars, mounts and positions.
Q: Do I have to loosen the bolt to be able to 'swivel' the fill valve?
A: No! They were designed to swivel without having to loosen the 'bolt'.
Q: Can I remove the forks from the bike without having to remove the Air Fork EZ Fills?
A: Yes, we re-designed our kits to allow for removal of forks without having to un-install the EZ Fills. (You will however have to remove the Black Air Caps which will gain enough clearance for fork removal)
Q: Why are the EZ Fill kits Brass and not Aluminum?
A: We initially made our test kits out of Aluminum since it is lighter than Brass, and lets face it, we're (the) Aluminum guys...But, we soon discovered that even using hard anodized coatings, the Aluminum fittings showed signs of wear in the 'pivot' area. We also realized that Brass is a better material to use where the pump interfaces (threads) on to the adapters. We considered using a brass adapter into the Aluminum, but after seeing the wear in the pivot area, Brass was clearly the best and safest option.
Q: Do you sell replacement parts for the EZ Fill kits?
A: Yes, absolutely. We offer replacement components for the EZ Fill kits, as well as replacement parts for any other Works Connection product you may have.
Q: Do you sell the Black Air Caps separately?
A: Yes, we do we sell them in a 2-pack and a 10-pack since they fit any and all Schrader valves.
Q: Why didn't you make a (2 into 1) kit for easier pressure adjustments?
A: We liked the idea of (2 into 1) initially, but realized quickly that if one side loses pressure for any reason (fork damage, leaky seal, air tubing failure, crash induced damage etc) that the front end of the bike would completely collapse, which would be a very dangerous situation.
Q: Couldn't you make a (2 into 1) kit that had some type of a backflow preventer or check valve that could still keep each side separate?
A: We could have designed a system that would work, but the cost and complexity of the system would be ridiculously expensive to produce and still prone to crash damage.
Q: Are the Air Fork EZ Fill kits made in the USA?
A: Yes, American made!
Air Fork EZ Fill FAQ’s
Q: What are the advantages of the 'Air Fork EZ Fill' over the stock setup of Air Forks?
A: Even though Honda / Husqvarna / KTM and Suzuki have a Schrader valve on the top of the fork, it is not easy to get a pump attached without removing the front number plate. If you have, or add, oversize bars or aftermarket bar mounts, the problem gets worse. Or if you own a Kawasaki and have dealt with the time-consuming task of removing the stock plugs, screwing in the adapters (which don't work with oversized bars) you have experienced the 'reason' we made these kits.
Q: How hard are they to install?
A: Installation is very simple. The Kawasaki bolts on in 2-3 minutes. The Honda / Husqvarna / KTM and Suzuki take about 5 minutes because you have to bleed the air out to install, and then re-fill the forks with air.
Q: Will they work on the Kawasaki if I move the stock handlebar clamps to the forward position?
A: Yes! You will need to rotate the forks 180 degrees in the triple clamps, so the EZ Fill kits will be at the 'back' of the forks.
Q: Do the kits work with all oversized bars and various bar mounts?
A: Yes, ALL configuration of bars, mounts and positions.
Q: Do I have to loosen the bolt to be able to 'swivel' the fill valve?
A: No! They were designed to swivel without having to loosen the 'bolt'.
Q: Can I remove the forks from the bike without having to remove the Air Fork EZ Fills?
A: Yes, we re-designed our kits to allow for removal of forks without having to un-install the EZ Fills. (You will however have to remove the Black Air Caps which will gain enough clearance for fork removal)
Q: Why are the EZ Fill kits Brass and not Aluminum?
A: We initially made our test kits out of Aluminum since it is lighter than Brass, and lets face it, we're (the) Aluminum guys...But, we soon discovered that even using hard anodized coatings, the Aluminum fittings showed signs of wear in the 'pivot' area. We also realized that Brass is a better material to use where the pump interfaces (threads) on to the adapters. We considered using a brass adapter into the Aluminum, but after seeing the wear in the pivot area, Brass was clearly the best and safest option.
Q: Do you sell replacement parts for the EZ Fill kits?
A: Yes, absolutely. We offer replacement components for the EZ Fill kits, as well as replacement parts for any other Works Connection product you may have.
Q: Do you sell the Black Air Caps separately?
A: Yes, we do we sell them in a 2-pack and a 10-pack since they fit any and all Schrader valves.
Q: Why didn't you make a (2 into 1) kit for easier pressure adjustments?
A: We liked the idea of (2 into 1) initially, but realized quickly that if one side loses pressure for any reason (fork damage, leaky seal, air tubing failure, crash induced damage etc) that the front end of the bike would completely collapse, which would be a very dangerous situation.
Q: Couldn't you make a (2 into 1) kit that had some type of a backflow preventer or check valve that could still keep each side separate?
A: We could have designed a system that would work, but the cost and complexity of the system would be ridiculously expensive to produce and still prone to crash damage.
Q: Are the Air Fork EZ Fill kits made in the USA?
A: Yes, American made!
Air Fork EZ Fill FAQ’s
Q: What are the advantages of the 'Air Fork EZ Fill' over the stock setup of Air Forks?
A: Even though Honda / Husqvarna / KTM and Suzuki have a Schrader valve on the top of the fork, it is not easy to get a pump attached without removing the front number plate. If you have, or add, oversize bars or aftermarket bar mounts, the problem gets worse. Or if you own a Kawasaki and have dealt with the time-consuming task of removing the stock plugs, screwing in the adapters (which don't work with oversized bars) you have experienced the 'reason' we made these kits.
Q: How hard are they to install?
A: Installation is very simple. The Kawasaki bolts on in 2-3 minutes. The Honda / Husqvarna / KTM and Suzuki take about 5 minutes because you have to bleed the air out to install, and then re-fill the forks with air.
Q: Will they work on the Kawasaki if I move the stock handlebar clamps to the forward position?
A: Yes! You will need to rotate the forks 180 degrees in the triple clamps, so the EZ Fill kits will be at the 'back' of the forks.
Q: Do the kits work with all oversized bars and various bar mounts?
A: Yes, ALL configuration of bars, mounts and positions.
Q: Do I have to loosen the bolt to be able to 'swivel' the fill valve?
A: No! They were designed to swivel without having to loosen the 'bolt'.
Q: Can I remove the forks from the bike without having to remove the Air Fork EZ Fills?
A: Yes, we re-designed our kits to allow for removal of forks without having to un-install the EZ Fills. (You will however have to remove the Black Air Caps which will gain enough clearance for fork removal)
Q: Why are the EZ Fill kits Brass and not Aluminum?
A: We initially made our test kits out of Aluminum since it is lighter than Brass, and lets face it, we're (the) Aluminum guys...But, we soon discovered that even using hard anodized coatings, the Aluminum fittings showed signs of wear in the 'pivot' area. We also realized that Brass is a better material to use where the pump interfaces (threads) on to the adapters. We considered using a brass adapter into the Aluminum, but after seeing the wear in the pivot area, Brass was clearly the best and safest option.
Q: Do you sell replacement parts for the EZ Fill kits?
A: Yes, absolutely. We offer replacement components for the EZ Fill kits, as well as replacement parts for any other Works Connection product you may have.
Q: Do you sell the Black Air Caps separately?
A: Yes, we do we sell them in a 2-pack and a 10-pack since they fit any and all Schrader valves.
Q: Why didn't you make a (2 into 1) kit for easier pressure adjustments?
A: We liked the idea of (2 into 1) initially, but realized quickly that if one side loses pressure for any reason (fork damage, leaky seal, air tubing failure, crash induced damage etc) that the front end of the bike would completely collapse, which would be a very dangerous situation.
Q: Couldn't you make a (2 into 1) kit that had some type of a backflow preventer or check valve that could still keep each side separate?
A: We could have designed a system that would work, but the cost and complexity of the system would be ridiculously expensive to produce and still prone to crash damage.
Q: Are the Air Fork EZ Fill kits made in the USA?
A: Yes, American made!